AUSRETROGAMER

The Pop-Culture E-Zine

You are here: Home / Archives for ausretrogamer

ausretrogamer

Gone (Adult) Toy Hunting

By

Ah, let’s not kid ourselves, these aren’t exactly adult toys, but they do indeed invoke nostalgia, a yearning if you will, for us adults of a certain vintage to want raid the toy shelves of our nearest department store!

If you are lucky enough to have a BIG W near you, you may want to head in and check out the toy section, as they are stocking a myriad of toys that us Gen X’ers will go absolute bonkers over!

The toys that grabbed our attention were of course the Star Wars action figures and the Nintendo related toys. What I wasn’t expecting was the variation of Masters of the Universe stock, which also included the retro 40th anniversary line – we had to wipe our drool!

See anything that takes your fancy?

This packaging brings back memories!

The MOTU Revelation line is very tempting!

Not sure we can relate to this MOTU, but younger generations may appreciate it

Stratos ($19) versus Mer-Man ($50) – big difference

Pokemon, Minecraft and Roblox – Big W has you covered!

Cat Peach!

Our favourite Princess – we miss her so much



Weeping At Another Video Rental Store Closing

By

Another Australian video rental store bites the proverbial dust!

We reported back in 2019 when the last Australian Blockbuster was closing its doors, and this time it’s no different, which we are sad to report that the independent family run video rental store in Kambalda, a mining town in the WA Goldfields, is closing its doors one last time after 40 years in business.

Run by the Assaad family since 1983, the video rental store has succumbed to FIFO (fly in, fly out) – where mining workers no longer reside in the town and are instead flown in and out. The steady decline has been a long time coming, with patronage almost nil which left the Assaad’s with no other option than to close this once thriving video rental store.

We wonder if there are other video rental stores still about in Australia? If you know of any, please let us know!

story and image source: ABC



The Legend Of Zelda Reimagined As A FPS DOOM VR Game

By

Imagine the original The Legend Of Zelda being played in the first-person perspective like Wolfenstein or DOOM, in VR!

Imagine no more, as the below video shows a re-imagining of the NES classic, The Legend of Zelda, as a first-person virtual reality game! This impressive mod works with QuestZDoom, so we can finally becomes fans of playing The Legend of Zelda in this perspective (unless the VR makes us queasy!!).

We hope this video stays up. If it is gone by the time you get here, then know that Nintendo has meddled and killed off creativity!


source: SugaryNoe



An Audacious Games Room Setup!

By

Well now that we have seen everything that 2023 has to offer, let’s get to 2024!

Seeing this amazing creation on Twitter this morning totally blew our mind. The engineering feat is off the charts. We wonder if this is Duke Nukem’s games room…….

And before you start screaming about aspect ratios, just chill, relax and be in awe of this crazily awesome thingamajig!



Operation Switch: Arcade1Up Pinball Mod

By

Performing essential surgery on our Arcade1Up Pinball machine

The Arcade1Up Pinball machines have recently received a new lease of life with community enhancements, like Team Encoder’s brilliant A1Pinner software, which allowed owners of these machines to install other Arcade1Up pinball packs (Marvel, Star Wars and Williams) and the Pinball Arcade and Zen Pinball applications (Android versions) with their plethora of pinball tables. Team Encoder went as far as creating a custom launcher and the ability to change the display to 1080p, which was a bit of a hit or miss due to the limited hardware spec inside these pinball machines.

We came across IntecGaming’s Nintendo Switch DIY Pinball kit about a year ago and have been eagerly awaiting its release. Once IntecGaming had this kit up for pre-order, we immediately jumped on it. The improvement is great value with this low cost kit, and of course, playing video games, especially the pinball (and shoot’em ups) variety in 1080p is exactly what this machine should have had from the start.

The IntecGaming Switch DIY Pinball kit is a physical modification to the Arcade1Up Pinball Machine, so we had to get our hand dirty so to speak. With no soldering required, this was as easy as unplugging the old and replacing them with the new! Of course the control panel with its ball-top joystick provides the arcade experience we were missing when playing Switch games.

Without further ado, here are the steps (with photos) that we took to operate and modify our A1Up Attack From Mars pinball machine:

Time to commence Operation Switch!

Unboxing the contents of the IntecGaming Switch DIY Pinball Kit: We need to replace 3 boards (marked A, B and C)

One last look at the machine before we start operating

Popping the hood

Popping the rear to get to the smaller (DMD) screen

Following the instructions to unplug the controller wiring from the old board and connect them to the new (A) board

Board A attached and controller connectors rerouted to plug into the new board

Next, is the sound and solenoid driver board (board B)

Second board is totally removed from the A1Up and replaced by IntecGaming’s Board B

The metal casing is replaced with a breathable plastic cover for Board B

The main board hiding in its metal casing attached to the LCD

Last of the board updates – replace the main board with IntecGaming’s Board C

The original main board is unplugged

Got to follow the instructions carefully here, as any wrong move will render the machine an expensive doorstop!

Wiring up the replacement main board (Board C) and putting it back in the casing. Having two HDMI out ports is a godsend!

With the boards replaced and connections all plugged in, it’s the control panel that the last thing to add 

The new replacement lockdown bar is beefier than the original!

All modifications completed!

Instructions to sync the control panel and kit to the Switch

The plastic stand is perfect to keep the Switch and dock tucked away

Switch is docked, 3.5mm sound jack & HDMI are plugged in too

Success! All powered up and ready to go! The DMD LCD acts as our selection screen

First game we boot up, Zen’s Pinball FX 3!

Going to put the original boards & other parts in a safe place



Zax Amusements Is Now At A Bigger & Better Location

By


Looks like 2023 is the start of new beginnings!

Our friends at Zax Amusements have relocated from their Port Melbourne location to a much bigger warehouse, service centre and showroom at 1661 Centre Road, Springvale, a south-eastern Melbourne suburb.

We will miss the old Port Melbourne location as it was convenient for us, however, the bigger showroom is a drawcard for us to visit Zax Amusements in Springvale to check out the latest arcade and pinball machines.

image source: Zax Amusements



Starry (Wars) Night Artworks

By

While endlessly scrolling through social media posts during the great void (the period between Christmas Day and New Year’s Eve), we came across these darn cool van Gogh inspired Star Wars ‘Starry Night’ artworks!

Happy New Year peeps!

image source: Star Wars always on Facebook



Ho, Ho, Ho, Happy Holidays!

By

As 2022 draws to a close, we wanted to wish you all a very Merry Christmas / Happy Festive Season and all the very best for 2023!

It’s been another tough year for everyone around the world, so we hope you can all take some time for yourself to recharge and spend it with those that mean the most to you.

We have recently moved our subscription service to Substack, so if you haven’t already subscribed, go here now and never miss any of our posts. Thanks again for supporting and engaging with us at Ausretrogamer.com and on our social channels.

We will be taking a break and be back in the new year with more awesome content! Stay safe and hope Santa brings you lots of presents!

See you in 2023!

 



Thrill Of The Chase: FurySevenSix visits the Canberra Vintage & Collectible Centre

By

Who doesn’t like a sneaky weekend trip to the nation’s capital?!

Well, that’s exactly what our good friend, Noel Wheatley, did this past weekend. Noel (aka: FurySevenSix) shared photos of the amazing retro gaming centre he found in Canberra on his Twitter and Instagram accounts. The Canberra Vintage & Collectible Centre is one of those places that will wow and indulge you in some very intoxicating nostalgia.

The below photos attest to the amazing collections found at the Canberra Vintage & Collectible Centre (Canberra VCC), from iconic gaming systems, classic video games, to mouth-watering collectibles that have been lost to time. Make sure you add the Canberra VCC to your must visit list now!

PS: Check out Noel’s Instagram for more pics and vids of this amazing place!

The important details:

  • Venue: Canberra Vintage & Collectible Centre
  • Address: 11/90 Barrier Street, Fyshwick, Australian Capital Territory

image source (used by permission): Noel’s Twitter and Instagram accounts



The Flipside Barcade: Adelaide’s Cool New Pinball Bar

By

If you are visiting Adelaide (or live in the great state of South Australia), then checking out The Flipside Barcade in Daw Park (about 7km south of the Adelaide CBD) should be at the top of your “must check out” list!

Infused with an American-style menu, craft beers to quench your hard-earned thirst and nostalgia inducing arcade and pinball machines, The Flipside Barcade is the hottest destination in the Festival State! The mix of food, drinks and amusement action is exactly what the doctor ordered. Oh yeah, if you are feeling competitive, then Flipside has plenty of pinball and arcade gaming tournaments on offer!

The important details:

  • Venue: The Flipside Barcade
  • Address: 538 Goodwood Road, Daw Park South Australia 5041

image source: The Flipside Barcade