The Pop-Culture E-Zine
We have previously featured customised GameCube consoles, like the Mario Sunshine one, but these custom painted consoles by Mago Serenil (CustomsGameCubes on Etsy) are just so darn gorgeous!
The best part is, these custom painted GameCube consoles are available from Mago’s Etsy store (Mago is currently on a break, but you can still get in touch via Etsy).
[story source: [technabob]
We love receiving emails from modders out there to show us their customisation work.
We received an email from Dorison Hugo (aka: @lyberty5 on Twitter) who tinkered with his purple GameCube to make it look like as if Mario was trapped inside the console. Dorison explains that this was a cosmetic mod, which still needed a bit of tinkering to get it done – like freeing up the space, in which he had to move the fan onto the other side of the case. Also, he had to drill small holes to allow air intake near the Mario figurine to ensure the console would not overheat.
This is a fairly simple and cheap-ish mod, with the window frame and Mario being made out of cheap water-based clay. Dorison has shown ingenuity throughout this customisation, including the use of cotton tips (Q-tips) acting as the prison bars. Dorison’s aim was to show that no real (and expensive) equipment was needed for a simple mod.
Have you customised your consoles? If you have, we’d love to check them out – hit us up on Twitter or Facebook!
image source: Dorison Hugo
Stop what you are doing right now! Grab yourself a bite and a coffee, settle into your most comfy chair and read this tale, the very detailed tale of Nintendo’s GameCube.
A long time ago, in a gal…. Oh wait, wrong story! This story is long and detailed, so make sure you give yourself a lot of time to read every word, as it is well damn worth it. The retro gaming history buffs will absolutely love this, from the delay of the GameCube launch, designing the GCN, motion controls with Gyro-Pods and the pressure to create the perfect controller, to cultivating relationships with third-party developers and publishers, the decline of the GameCube and the end of their longtime partnership with Rare, this story has everything, warts and all!
Are you comfortable yet? If you are, settle in and enjoy Emily Rogers’ story of Nintendo’s GameCube.
image source: Dromble.com
When DIY guru, Martijn Gazenbeek (aka: Akira on the bit fix gaming boards) contacted us to show us his latest creation, we had to pick up our collective jaws off the floor and wipe away the drool! In a tribute to Metroid, in particular Samus Aran’s Varia suit, Martijn has created the Varia Cube, a hot portable GameCube system!
Martijn is no stranger to creating lavish portable systems from old school gaming gear – he was also the mastermind behind the GC Lynx! For this particular project, Martijn toiled for 10 months and we can safely say, it looks like it was well worth the effort. Checking out the technical information (see further below), we are still in awe of this beast! For the full build log, you can go over here.
Oh yeah, the Varia Cube doubles up as a fully functional GameCube console (sans DVD drive) with composite and component out video interfaces to connect to any TV! The system is topped off with an impressive transport case. That Martijn Gazanbeek has thought of everything! Now get your bib on and start drooling!
image source: Bit Fix Gaming boards
* Case made out of a Nintendo GameCube ASCII Keyboard
* Painted in Samus Aran’s Varia Suit colour scheme
* GameCube PAL motherboard
* Original GameCube heatsink with custom fan
* All original Nintendo controls and sticks
* N64 joystick caps
* Nintendo DS Lite D-Pad
* Full original analog trigger (L and R buttons)
* Strong Rumble Feedback Motor
* 7 Inch LCD, VGA, 800 x 480, 16:9, Dalian Good-Display
* Original Nintendo Component video chip wired to produce VGA and Component out
* Swiss software can force any game into 480P and use a widescreen hack to force 16:9 (no stretch) for correct aspect ratio
* Wasp Fusion modchip flashed with Swiss Autoboot firmware
* 6400 mAh batteries (4 x Panasonic 3400 mAh 18650), 2.5 hours gameplay
* Battery Indicator with 4 leds to see how much power is left
* 128 MB Memory card soldered directly onto the motherboard (GameCube slot-A)
* SD Gecko adapter to run homebrew and emulators through Swiss (GameCube slot-B)
* Mini 2*3W @ 4O PAM8803 Class D Audio AMP
* Stereo sound speakers, used from ASUS ME172V MemoPad
* Switching stereo headphone jack
* VGA breakout box connector to hook up the console to a TV
* Switch to select between VGA/Component and swapping controls from console to breakout box for player one
* Audio controlled via right menu button
* Video control to access display menu – to switch between AV (composite) and VGA display
* Play ‘n charge – system can play from wall socket while being charged (comes with charger and power adaptor)
* Comes with 12V car adapter- play on the go with the high amp adapter
* Comes with 1 x 32GB SD card for GameCube games (wasp fusion slot) and 1 x 8GB for homebrew, games and emulators (GameCube Slot-B)
* Comes with breakout box
* Breakout box has 4 player ports, Component video port (Y Pr PB), composite video and stereo audio ports – compatible with Wavebird
* System comes with transport case