AUSRETROGAMER

The Pop-Culture E-Zine

You are here: Home / Archives for Modding

Modding

Guide: How To Softmod Your PS VITA

By

This guide will provide you the steps to permanently mod your PS VITA (2000 Series models!) using the browser-based hack/jailbreadk. This mod is perfectly safe and allows you to run emulators, homebrew apps and load/play backups of your PS Vita, PSP and PS1 games. This mod will work on any PS Vita firmware version (up to and including v3.74).

As mentioned above, this guide is intended specifically for the PS Vita 2000 models, however, most steps can still be followed to mod your 1000 model. As for modding the PS TV, there are a number of differences in the process, therefore we recommend you to visit VitaHacks site for the specific guide.

OK, so you want to unleash your PS VITA, then follow along!

Before you begin, you’ll need the following items:

  • SD2Vita Pro – PS Vita Card Adapter (approx. AU$13); and
  • Samsung 256GB EVO Plus Micro SD (approx. AU$34)

NOTE: Prices are correct as at date of publication!

First thing – grab your fully charged PS Vita 2000, SD2Vita adapter and micro SD card!

Insert the micro SD card in the SD2VITA adapter

Check your system’s software (firmware) version to ensure you are at the latest version (3.74)

Connect your PS Vita to your local WiFi, and log into the PSN Store at least once before starting this mod!

Installing VitaDeploy and Henkaku is as easy as opening up the web browser app and navigate to jailbreak.psp2.dev

At the HENlo – a Playstation Vita Jailbreak site that appears, tap on “Unlock my Vita” and then “Unlock”

On the black screen menu, navigate to and select “Install henkaku” and press the X button. Once that is done, do the same for “Install VitaDeploy”. Once done, navigate down to “Exit and mount sd2vita to ux0” and press the X button

Don’t forget to insert the SD2Vita adapter (with the micro SD) into your PS Vita and ensure your device is connected to the internet before performing the next steps!

Open the Vita’s Settings app, and open “HENkaku settings”

Select “Enable Unsafe Homebrew” check-mark

Open the VitaDeploy app and navigate to “Install a different OS” -> “Quick 3.65 install”. The app will download and install v3.65. It will ask you if you really want to do it — just press X to confirm. Once complete, the Vita will reboot.

Open the Settings app and then go to System Information to confirm that you are now on v3.65 with the enso permanent hack

Now it’s time to setup the SD2Vita storage! Open VitaDeploy and navigate to Miscellaneous -> Format a storage device. Select “Format target storage” and follow any prompts. Reboot the device.

Open up your Settings app, then navigate to Devices -> Storage Devices, and enable YAMT. Reboot the console.

Open VitaDeploy -> File Manager, and make sure that the “uma0” partition is visible. Navigate to the “ux0” partition and select all of the folders except “SceloTrash” (use the SQUARE button to select). Press the TRIANGLE button and select “Copy”.

Navigate to the “uma0” partition, press TRIANGLE to bring up the menu, and select “Paste”.

Return to the Settings app and navigate to Devices > Storage Devices. Set the following options:
– ux0: SD2Vita
– uma0: Internal Storage 

Reboot the Vita, then head to Settings -> System Information and the memory card size should now reflect the capacity of your microSD card (in our case, our micro SD’s capacity is 256GB)

Now to the business end of the mod – Installing the core homebrew apps! 

Open the VitaDeploy app and naviate to App Downloader, and install the following apps:

– VitaShell – file management system
– VitaDB Downloader – Library tool to browse and download various apps and homebrew games
– Adrenaline – a PSP environment that allows you to play PSP and PS1 games with perfect performance
– PKGj – Powerful app that allows you to install backups of your PS Vita, PSP, and PS1 games
– Custom Themes Manager – as the name implies, this allows you to manage custom themes
– iTLS Enso – adds TSL v1.2 to the device, which fixes many plugin errors, adds more installer options, allows secure (https) internet access, and restores access to the PS Store
– Registry Editor – this allows you to improve the color saturation on the PS Vita 2000 models

Once all the apps have been downloaded and installed, exit the VitaDeploy app and reboot your Vita
NOTE: We installed additional apps, which aren’t mandatory

Now that your PS Vita 2000 has been jailbroken, feel free to explore and install custom themes (like we did – see below)

Once you have that cool custom theme, it’s time to check out the homebrew apps, emulators and homebrew games in VitaDB Downloader. Once done there, grab the backups of your favourite PS Vita, PSP and PS1 games via PKGj 

We used the SwitchView UI frontend (from VitaDB Downloader) to make our Vita look like the Nintendo Switch!

Finally, time to enjoy and play some games on your freshly modded PS Vita! Bonsai!

all images remain the property & © of ausretrogamer.com



HALO KART: The Incredible Halo x Mario Kart Mashup

By

Ah geez there are some keen and very very clever peeps out there!

This Cursed Halo Kart mashup of Halo and Mario Kart is based on the Cursed Halo Again mod created by modder and Steam user InfernoPlus.

Just like in Mario Kart, players race around the track in their Halo modded vehicles, trying to win by all means, including shooting each other! This is our kind of Mario Kart game 😉

story source: technabob



Operation Switch: Arcade1Up Pinball Mod

By

Performing essential surgery on our Arcade1Up Pinball machine

The Arcade1Up Pinball machines have recently received a new lease of life with community enhancements, like Team Encoder’s brilliant A1Pinner software, which allowed owners of these machines to install other Arcade1Up pinball packs (Marvel, Star Wars and Williams) and the Pinball Arcade and Zen Pinball applications (Android versions) with their plethora of pinball tables. Team Encoder went as far as creating a custom launcher and the ability to change the display to 1080p, which was a bit of a hit or miss due to the limited hardware spec inside these pinball machines.

We came across IntecGaming’s Nintendo Switch DIY Pinball kit about a year ago and have been eagerly awaiting its release. Once IntecGaming had this kit up for pre-order, we immediately jumped on it. The improvement is great value with this low cost kit, and of course, playing video games, especially the pinball (and shoot’em ups) variety in 1080p is exactly what this machine should have had from the start.

The IntecGaming Switch DIY Pinball kit is a physical modification to the Arcade1Up Pinball Machine, so we had to get our hand dirty so to speak. With no soldering required, this was as easy as unplugging the old and replacing them with the new! Of course the control panel with its ball-top joystick provides the arcade experience we were missing when playing Switch games.

Without further ado, here are the steps (with photos) that we took to operate and modify our A1Up Attack From Mars pinball machine:

Time to commence Operation Switch!

Unboxing the contents of the IntecGaming Switch DIY Pinball Kit: We need to replace 3 boards (marked A, B and C)

One last look at the machine before we start operating

Popping the hood

Popping the rear to get to the smaller (DMD) screen

Following the instructions to unplug the controller wiring from the old board and connect them to the new (A) board

Board A attached and controller connectors rerouted to plug into the new board

Next, is the sound and solenoid driver board (board B)

Second board is totally removed from the A1Up and replaced by IntecGaming’s Board B

The metal casing is replaced with a breathable plastic cover for Board B

The main board hiding in its metal casing attached to the LCD

Last of the board updates – replace the main board with IntecGaming’s Board C

The original main board is unplugged

Got to follow the instructions carefully here, as any wrong move will render the machine an expensive doorstop!

Wiring up the replacement main board (Board C) and putting it back in the casing. Having two HDMI out ports is a godsend!

With the boards replaced and connections all plugged in, it’s the control panel that the last thing to add 

The new replacement lockdown bar is beefier than the original!

All modifications completed!

Instructions to sync the control panel and kit to the Switch

The plastic stand is perfect to keep the Switch and dock tucked away

Switch is docked, 3.5mm sound jack & HDMI are plugged in too

Success! All powered up and ready to go! The DMD LCD acts as our selection screen

First game we boot up, Zen’s Pinball FX 3!

Going to put the original boards & other parts in a safe place



Modding Our Arcade1Up Pinball With IntecGaming’s Nintendo Switch Panel

By

There were a couple of things we were looking forward to this year, Stern Pinball’s Insider Connected Kit for our Star Wars pinball machine, and IntecGaming’s Nintendo Switch Panel for our Arcade1Up (virtual) pinball machine.

Well, it was almost 2 for 2 in 2022, however, our Stern Pinball Insider Connected kit was delivered incomplete – which means we will have to wait for the next boat to arrive down under.

On the flip side, the IntecGaming panel for our A1Up pinball machine arrived and we can’t wait to get it installed! Just in case you have no idea what this thing is or does, check out our previous post here.

We will write about our exploits of getting this mod installed, so stay tuned (and wish us luck)!



Nintendo Switch Arcade and Pinball DIY Kit for your Arcade1Up Pinball Machine

By

Take your Arcade1Up Pinball Machine to another level!

Almost a year ago we were gushing over IntecGaming’s Nintendo Switch Arcade Control Panel for the Arcade1Up pinball machines. It was promised to be released in 2022, and it now looks like IntecGaming has kept that promise!

If you have an Arcade1Up Pinball machine (even if you have modded with the additional Zen Pinball games), this new DIY Kit will take your A1Up Pinball machine to another level! We don’t have firm specs yet, but from the few bits and pieces we have found in our research, this kit will let you play your Switch games on the vertical screen, complete with an arcade joystick and buttons control panel for that authentic arcade feel. Of course you will still be able to use the flipper buttons on the side of the cabinet for your pinball gaming fix! For the Switch games that aren’t vertical (TATE), they can still be played, albeit in a letterboxed view on the vertical screen. The DIY kit will require tinkering to get setup, but we reckon it will be totally worth it.

We are just excited to play all of our vertical games using this kit, especially our library of shoot’em ups and pinball games (hello The Pinball Arcade, Pinball FX 3 and Stern Pinball Arcade!). This will breath a new life into our Arcade1Up Pinball machine.

The pre-order period begins on Halloween (Oct 31st U.S. time), with a special price of US$119.99! Who is in? We most certainly are.

PS: If you want to see this kit in action, check out ToyKade’s review video now!

image source: IntecGaming



Hacker Runs DOOM on Electronic Badge

By

Wish we were as clever as programmer Phil Ashby.

DOOM seems to be able to run on anything electronic with a screen, so Phil didn’t want to miss out. He took his electronic Tidal badge from the 2022 ElectroMagnetic Field Festival (aka EMFCamp) in the UK and got it to run DOOM, yes, DOOM!


source: HonekaiMedia

story source: technabob



PICOmputer ZX: Raspberry Pi PICO Powered Pocket ZX Spectrum

By

Need a(nother) new project in your life? If you do, then check out Peter Misenko’s (aka: bobricious’) super cute PICOmputer ZX – Pocket ZX Spectrum on Hackaday, powered by a Raspberry Pi PICO!

This is an ongoing project, so expect more details and instructions on Hackaday. Also follow bobricious’ GitHub here.

image source: Hackaday



Cloud Computing With The Commodore 64

By

It was only a matter of time that the venerable Commodore 64 would get onto the cloud! Yep, you read that right, you can now dust off your trusty breadbin and use it to communicate with a variety of clients over Azure using a SignalR client written in 6502 assembly!

If you are keen to check this out for yourself, take a look at the SignalR-C64 code on GitHub.

Long live the Commodore 64!


source: moozzyk

PS: Thanks to Matty G for making us aware of this geeky awesomeness!



Very Cool Tabletop Arcade Cabinets

By

Check out these amazing tabletop arcade cabinets created by Hidecade!

According to Hidecade, the Xevious tabletop arcade is complete with a vertical screen and a JAMMA harness – which is totally mind-blowing! Oh how we wish these were for sale 😉

source: Arcade Cabinets on ameblo.jp



Paw Patrol Super Hang-On

By

Our very good friend and Guinness World Record holder for creating the Largest playable Game and Watch device, Dr. Tom Tilley, has been keeping busy during the Festive Season with a cool new mod!

Spotting a Paw Patrol toy for $5 in his local op-shop, Dr. Tom thought how awesome and fun would it be to make this toy into a Super Hang-On controller – and we have to agree! Upon showing Lil Ausretrogamer this amazing mod, she was excited just as much as we were!

Before you say, “but the toy was in a working state”, relax, Tom found room inside to fit a joystick potentiometer with a 3D printed guide so it could pick up the steering without damaging the toy. The joystick and three buttons from the handlebars were connected to a Raspberry Pi Pico that Dr. Tom programmed to act as a USB joystick controller. The best bit is, when you’re done playing Super Hang-On, you just unplug the Raspberry Pi and reconnect the buttons to restore the original functionality of the toy. Now that is cool!


source: WithProfessorTom