AUSRETROGAMER

The Pop-Culture E-Zine

You are here: Home / Archives for Raspberry Pi

Raspberry Pi

DOOM on the Commodore 64 is so RAD!

By

DOOM has been run on a multitude of devices – if it has a screen, then DOOM has ran on it! With this being the case, why not have DOOM run on the trusty 8-bit micro, the Commodore 64?

As you can see from the video below, that is exactly what we have here – a DOOM tech demo going by the title of RAD-DOOM which enables gamers to play DOOM on their Commodore 64 via the RAD Expansion Unit by Frenetic.

The RAD Expansion Unit contains a Raspberry Pi that takes the role of a CPU replacement for the Commodore 64. The graphics are still rendered by the original VIC-II chip. All technical details of RAD-DOOM can be found in Frenetic’s GitHub repo.

The gameplay starts off with keyboard controls, with the 1351 mouse control enabled later on. The special settings menu is visible from time to time where graphics rendering options and screen presets are available.

It’s amazing (and darn awesome!) what is still possible on the 41 year old 8-bit computer! Long live the C64!


source: emulaThor



PICOmputer ZX: Raspberry Pi PICO Powered Pocket ZX Spectrum

By

Need a(nother) new project in your life? If you do, then check out Peter Misenko’s (aka: bobricious’) super cute PICOmputer ZX – Pocket ZX Spectrum on Hackaday, powered by a Raspberry Pi PICO!

This is an ongoing project, so expect more details and instructions on Hackaday. Also follow bobricious’ GitHub here.

image source: Hackaday



Review: Waveshare GPM280 Portable Game System

By

When it comes to emulating our favourite video games from years gone by, we have had a plethora of handhelds to get a hit of nostalgia, each having their own pros and cons. The latest emulation handheld to land in our office is the good looking Waveshare GPM280 Portable Games Console with Raspberry Pi 3.

Right from the Apple like packaging, we knew this one would be special to hold and play. Unboxing the GPM280 we were immediately wowed by its striking looks, which are a nod to Nintendo’s gorgeous Game Boy Micro Famicom 20th Anniversary Edition. Unlike the GB Micro’s metallic casing, the GPM280 case is plastic, with its sparkling metallic hue making it stand out and feeling comfortable in hand. The D-pad and four face buttons sit a tad high, so they will require further depressing compared to the GB Micro. This isn’t a bad thing, especially if you have not touched a GB Micro in a long time. If you have big hands, then you would be aware that the GB Micro was a crippling experience, so luckily the GPM280 is a larger unit, accommodating those of us with larger mits. The two shoulder buttons have a distinct click when pressed which we like quite a lot. In keeping with the GB Micro, the GPM280’s on/off switch, Select/Start buttons and volume rocker are in the identical positions as Nintendo’s cute little handheld, but just that tad larger (again, a good thing!). There is also a TF card slot near the 3.5mm audio jack. And before we forget, the package also includes a protective drawstring pouch, lint-free cloth, screwdriver and very importantly, a 32GB microSD card to get you started and a 5V 3A charger with an Australian plug – a nice touch indeed!

Powering the brain of the GPM280 is a Broadcom BCM2837B0 64-bit 1.2 GHz quad-core ARM Cortex-A53 processor (Raspberry Pi Compute Model 3+ Lite) with 1GB RAM, which is enough power to run most console and computing emulators from the second generation all the way up to the fifth gen with ease. Coupled with the processor is the impressively vivid 2.8″ IPS screen (640×480 resolution), with a laminated toughened glass panel capable of 60 frames per second and a 70% NTSC colour-gamut! We must admit, the screen is gorgeous in real life, so no photos will do it justice in this review. With a 1500 mAh battery, there is enough juice to keep you gaming on the go for a couple of hours before the next recharge.

Being Recalbox fans (Ed: nothing against RetroPie), we opted to go with it on our GPM280. The ease of use can’t be underestimated when it comes to setting up the system. Once Recalbox was up and running, we setup our system on our office WiFi, which allowed us to easily configure settings, monitor the hardware and very importantly, add our favourite games (ROMs) via our web browser – simple drag and drop and you are done! The GPM280 also has Bluetooth connectivity, so there is the option to add external controllers (Ed: due to time constraints, we didn’t test this feature. We will update this review when we do!).

The games truly pop on the GPM280

The quality and versatility of the GPM280 is quite impressive, but the critical question still remains, how does it play games? The short answer is, it plays them darn well and accurate. If you have clean ROMs, then you won’t experience any issues like choppy sounds or frame clipping like we did on a few of our Lynx and Nintendo 64 games. We also ran into button mapping issues on our Sega Genesis / Mega Drive games. Luckily, Recalbox has a plethora of options and settings to dial in things just right.

The already mentioned 2.8” IPS screen feels the right size and is quite clear and bright with the colour gamut making games pop and looking like they are being played on their respective systems on a CRT TV. We didn’t play any heavy text adventure games, so we can’t comment on how the system and screen fare with that gaming genre. For most of the classic titles we enjoy from the late 70s, 80s to the mid-90s, the GPM280 handled them with great accuracy and zero lag. The sound is handled by a built in speaker which does an admirable job. Another nifty aspect of the GPM280 is the power indicator on the Select and Start buttons, just like on the GB Micro – red/flashing meaning battery running low and green meaning you are good to game on the go! Speaking of gaming on the go, we got approximately 1.5hrs of continuous gaming before we had to recharge the 1500mAh battery – we just wish the battery lasted a tad longer.

Conclusion

The Waveshare GPM280 definitely impresses with its build quality and feel, grunty computing hardware and ease of use, but that all comes at a premium price. If you are in the market for a stylish compact gaming system that plays a heap of your favourite games from yesteryear without any issues, has media centre capabilities (via Kodi) and looks like the gorgeous Game Boy Micro Famicom 20th Anniversary Edition, only bigger, then the GPM280 may be for you. Game on!

Product: Wavershare GPM280 Portable Game System
Price: AU$244.55
Store: Small Devices

GPM280 vs Game Boy Micro

Dimensions – it’s a great size!



Disclaimer: The GPM280 handheld was provided by Small Devices for this review.

Recalbox 7.2 – The Awesome New Update!

By

Recalbox 7.2 – released on April 23 at 9pm (GMT+2)!

Hey peeps, here is some awesome news that the Recalbox folks have shared with us – this Friday, April 23rd, at 9:00pm (GMT+2), they will finally launch their long awaited 7.2 update, packed with heaps of new features, new systems, functionalities and optimisations!


source: Recalbox via YouTube

To recap what is new and improved in Recalbox 7.2, which there are many, we thought we’d share the major highlights right here:

MAJOR NEW FEATURES:

Light-Gun Games!

Play more than 250 lightgun games on many different systems (Arcade, Megadrive/MegaCD, Dreamcast, and Playstation to name just a few), no configuration needed! Now gathered under a new “LightGun” virtual system.

Better 3D performance on Raspberry Pi 4!

The team has optimised Recalbox, allowing almost all N64, Dreamcast, Naomi & Atomiswave games to run at full speed on Raspberry Pi 4!

Overclock the Raspberry Pi 4!

And for even more performance, we’ve tested and chosen 4 optimal overclock settings on the Raspberry Pi 4. Overclocking your Pi will increase the frame-rate on CPU and GPU intensive games.

Improved PSX/N64/PSP performance on ODROID-GO Advance/Super

Play almost all PSX, N64, and PSP games at full speed on both ODROID-GO Advance & ODROID-GO Super!



NEW FEATURES:

New systems!

5 new supported systems are added to the nearly 120 systems already supported in Recalbox:

  • Watara Supervision: This cheap Game Boy clone was manufactured by Watara in 1992. It was later licensed to several third-parties, and released under many different names. 69 games have been officially released.
  • PICO-8: A virtual console similar to the TIC-80 with over 4000 games available, largely popularised by the incredible success of “Celeste”, the famous platformer initially developed by Noel Berry and Maddy Thorson on Pico-8 in 2015, before being released on all modern platforms in 2018!
  • Pocket Challenge V2: A Japanese handheld console that specialises in educational games.
  • Elektronika BK: BK (БК), Russian abbreviation for “бытовой компьютер” – “home computer” is a series of Soviet 16-bit home computers, developed under the brand Electronika by NPO Scientific Center. Elektronika BK was the only “official” Soviet home computer. The BK-0010/BK-0011 and Terak 8510/A were manufactured from 1984 to 1993 and sold at the price of 650 Rubles, which was… almost 4 months of average salary!
  • EPOCH SuperCassette Vision: The 2nd generation EPOCH console released in 1984 and counting a total of 30 officially released games and 3 unreleased. The porting of this Japanese emulator to Libretro is a Recalbox exclusive!

Dual JoyCon support (Nintendo Switch controllers)

Recalbox now supports both left and right JoyCons! In addition, you can use both JoyCons as a single combined controller!

Bluetooth Audio

Connect your Bluetooth headphones or speakers! (just pair them like you would a controller, for now).

New cores

3 new emulators are also available, depending on your hardware:

  • Libretro NeoCD added as NeoGeoCD core: loads CDs so much faster!
  • Libretro DOSBOX Pure: Don’t struggle with complicated DOS setups anymore! These games
    have never been more plug & play!
  • Libretro-craft: A Minecraft clone available on x86 & x64 platforms only.

Hide pre-installed games

Pre-installed games are no longer copied into the user share. They stay on the system and can be hidden/shown using an option from the settings menu.



IMPROVEMENTS:

Main menu

The main menus have all been rewritten. They’re now faster, consume less memory, and are more intuitive. The most useful options have been moved so they’re faster to access. Reboots can now be delayed. This way, you can configure everything you need to before having to restart.

New options have been added:

  • Swap A & B buttons: change the way you validate and cancel actions.
  • Factory reset: reset all configurations (only keeps your games, saves, and scraped data)

Sound

In-game video sound/music is now available! You can choose between the following sound mode:

  • Background music only (EmulationStation music)
  • Video sound only (scraped videos)
  • Background music AND video sound mixed
  • Background music OR video sound (when playing videos in the new Gameclip screensaver)

Internal Scraper

The internal scraper has been greatly enhanced:

  • Improved menus. Now more intuitive, less clicks required to get things done.
  • Better region priority management: get better metadata for your region.
  • Ignore file referenced from .cue/.m3u and other multi-file roms: no more scraping the same
    game twice!

System

  • Check image integrity when updating Recalbox
  • Added a new Reset to Factory Settings option to reset all Recalbox & emulator settings
    without losing any user data: games, saves, screenshots, music, etc.

Emulators

Many emulators have been updated and/or reconfigured for new features, or to achieve better performance.

  • Dolphin updated to version 5.0-13178.
  • Stella (A2600) updated to fix lots of bugs (eg: Pitfall II)
  • Supermodel updated to version 839
  • UAE updated to support CHD
  • Np2Kai (PC98) updated to fix several issues
  • Odyssey² updated to add Europeans/French models (new RetroArch options)
  • Mupen64plus-next updated for better compatibility and performance! This core is now available on almost all platforms and performs very well!
  • FBNeo updated to support latest game additions
  • Libretro Duckstation is now available on all platforms!
  • Beetle-Saturn updated to improve compatibility (PC only)
  • Amiberry updated to version 3.3 for better performance & new options
  • Libetro-Parallel-n64 updated and fixed on almost all boards (except low-end PIs)
  • VIC20 is now shown as its own system, instead of only being available under C64
  • Videopac+ is now available as its own system, instead of being available as Odyssey² sub-model
  • Libretro MAME has been optimised to run full-speed on low-end PCs.
  • ScummVM updated to v2.3.0 and merged with ResidualVM



BUG FIXES:

Lots of bug fixes, as usual:

  • Fixed the ODROID-GO Advance v1 controller
  • Fixed the 8bitdo NES30 Pro rev1 controller mapping
  • Fixed missing BIOS MD5 & other minor errors in BIOS database
  • Removed useless BIOS files (PalmOS)
  • Fixed the Retroarch shortcut on ODROID-GO Advance
  • Fixed shaders on ODROID-GO Advance
  • Fixed lost support of open and WPA-PSK-SHA256 WiFi keys
  • Correction a fan problem with the NESPi 4 Case

TECHNICAL FEATURES:

Buildroot

Buildroot has been bumped to version 2020.11.

Kernels

Linux kernels have been bumped to:

  • 5.4 for the ODROID XU4
  • 5.8 for both x86 and x64
  • 5.10 for all Raspberry Pis
  • Both ODROID-GO Advance & GO Super use a special Rockchip 4.4 kernel.

PulseAudio

We’ve moved from a purse ALSA audio backend to PulseAudio! Recalbox now supports more audio devices — and even Bluetooth audio!

image source: Recalbox

 

There you go peeps, to say we can’t wait for Recalbox 7.2 would be a massive understatement!



Using A Real Car As A Mario Kart 64 Controller

By

There are some cool and crazy mods out there, and then there is this one!

Let’s face it, not everyone is a fan of the N64 controller, so what does one do to compensate for this deficit? If you are Dan Hlavenka, you grab your dad’s Chevrolet Volt and hack a Raspbery Pi with a CANbus (PiCAN2) shield that plugs between the OBD-II port and a laptop with tools and a N64 emulator. Once all the controls are mapped and setup, you use the real Volt’s steering wheel, accelerator and brake pedals to play one of the best N64 games ever!

Pfft, who needs the N64 controller when you can use a real car instead.


video source: Gordon Hlavenka

[source: technabob]

 

Retro Handheld: Burger King Game Boy Color

By

This is an old one, but we thought it was still worth repeating, in case you missed it the first time around.

If you were lucky enough to have had a meal at Burger King in 2000, you may have been handed a plastic replica of the Game Boy Color which had analogue games built in.

Fast forward a decade and a half and that cute little Burger King Game Boy Colour toy with its analogue games has been DIY hacked with a Raspberry Pi Zero stuffed inside, morphing it into an awesomely cool and working Game Boy Colour emulator! Wish we were this clever.

[original story and images via Technobob]



PIper: Build Your First Real Computer

By

You know you have created something special when you have Elon Musk’s kids playing and loving it, and Apple Co-Founder, Steve Wozniak espousing how great your product is for young minds.

Piper is a computer kit that kids assemble themselves! The Piper Computer Kit is aimed at youngsters, growing their confidence around being creators of technology instead of purely consumers.

Kids are quite inquisitive by nature – when they are given iPads, computers and smartphones, they don’t see how technology actually works.  Kids may actually think that technology works by magic, and later in life, when the opportunity to learn or build something tech-related comes up, they feel intimidated.

With LEGO and Minecraft on the other hand, you can get started right away. It’s easy. This ease leads to confidence, which in turn leads to incredible creations. The Piper Computer Kit allows kids to create with code and electronics as simply as placing LEGO bricks or craft a diamond helmet in Minecraft. Piper truly inspires the next generation of inventors and creators!

To find out more about this great computer kit, visit the Piper site.

Build it and they’ll come

Build a real computer from 100+ parts and an engineering diagram!

Create your next science project or invent a new smart home device!

Learn to build and program electronics with immediate results!

source: Piper Computer Kit

 

The World’s Smallest MAME Arcade Cabinet

By

Adafruit has made an astoundingly small MAME arcade cabinet using a Raspberry Pi Zero – adorable! Read all about how it was made here.
smallest-arcade-1 smallest-arcade-2

Source: Adafruit via Laughing Squid

____________________________________________________________________________________________________________________

msausretrogamerMs. ausretrogamer
Co-founder, editor and writer at ausretrogamer – The Australian Retro Gamer E-Zine. Lover of science fiction, fashion, books, movies and TV. Player of games, old and new.

Follow Ms. ausretrogamer on Twitter

 

 

Pi Cart: 2,400 Vintage Games In A NES Cartridge

By

pi-cart-2Wow – this innocent-looking NES cartridge contains 2,400 vintage games! Watch the video, then make your own.

Source: howchoo via Technabob

____________________________________________________________________________________________________________________

msausretrogamerMs. ausretrogamer
Co-founder, editor and writer at ausretrogamer – The Australian Retro Gamer E-Zine. Lover of science fiction, fashion, books, movies and TV. Player of games, old and new.

Follow Ms. ausretrogamer on Twitter

 

 

PIK3A: Raspberry Pi 3 IKEA Cocktail Tables

By

PIK3A featuredThere’s no better IKEA hack than a retrogaming IKEA hack, and these fantastic ‘PIK3A’ Raspberry Pi 3 IKEA cocktail arcade tables are the best! Even better, you can make your own by following spannerspencer’s detailed instructions on the element14 website (PIK3A mark I and PIK3A mark II).

The PIK3A mark I
PIK3A B

The PIK3A mark II
PIK3A mark II B

PIK3A II

Sources: element14 via @mattgillard, and element 14

____________________________________________________________________________________________________________________

msausretrogamerMs. ausretrogamer
Co-founder, editor and writer at ausretrogamer – The Australian Retro Gamer E-Zine. Lover of science fiction, fashion, books, movies and TV. Player of games, old and new.

Follow Ms. ausretrogamer on Twitter